iPhase Level Measurement and Water Profiler
The iPhase profiler measures the oil water interface and provides accurate measurements of oil in water concentration inside hydrocarbon separators.
The iPhase profiler measures the electrical conductivity of the water/oil mixture surrounding each sensor.
Dispersed oil droplets are non-conductive compared to the surrounding water. The overall conductivity will therefore decrease with increasing concentration of oil. The iPhase sensors utilize the conductivity difference to measure the oil in water content.
Sand build-up on the bottom of the separator is measured using the same principle as oil in water measurements. A sensor surrounded by sand will measure lower conductivity than a sensor in water. The profiler will monitor sand build-up as it gradually increases in levels.
Downloads
-
Find your nearest Hamworthy Contact
-
Challenges in Oil & Water Separation
Hamworthy have the know-how to solve your oil/water separation problems such as emulsions, oil/water quality, heavy oils, chemicals, heating reduction, etc
-
Laboratory Services
We have formed a laboratory to perform applied science within separation technology to solve your operational problems.
